Need Help! Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload


Results 1 to 2 of 2

Thread: Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload

  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload

    Hi,

    I recently started on a small project to get our CNC mill up and running. The electricians have come out and powered it up. The used a transformer to convert 415V to 230-240V for the controller which is a Heidenhain TNC2500. The mill boots up alright, tests the memory without any problems, comes up with power interrupted and then when I hit the CE button, it quickly says traverse the axes and then comes up with error 'SPINDLE MOTOR FAN OVERLOAD'.

    Is this a simple reset button on the motor or a relay? The sparky checked the output for the tranny and it was between 230V and 240V.

    Any information would be appreciated.

    Similar Threads:


  2. #2
    Member Tkamsker's Avatar
    Join Date
    Oct 2010
    Location
    Austria
    Posts
    1189
    Downloads
    0
    Uploads
    0

    Default Re: Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload

    We did retrofit of Bridgeport which had an tnc2500 we have Parts to sell ..

    Gesendet von meinem SM-N9005 mit Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload

Bridgeport Interact Mk11 Series 1 - Spindle motor fan overload