Need Help! FADAL 88HS POST VER 29


Results 1 to 6 of 6

Thread: FADAL 88HS POST VER 29

  1. #1
    Member
    Join Date
    Jan 2007
    Location
    America
    Posts
    172
    Downloads
    0
    Uploads
    0


  2. #2
    Registered
    Join Date
    Dec 2011
    Location
    United States
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default Re: FADAL 88HS POST VER 29

    Spock,

    The OEM post processor has worked for those machines for a long time. Are you having issues using the install Format 2 post?



  3. #3
    Member
    Join Date
    Jan 2007
    Location
    America
    Posts
    172
    Downloads
    0
    Uploads
    0

    Default Re: FADAL 88HS POST VER 29

    Sean,

    I am trying the one that came with my install Cd (29). This one would need some editing to work. This is a new-to-me control, and I was hoping to get off running parts without having to dive into every little detail that this control needs. Pull up the PP that you are sending out with 29, post some code to peck drill a few holes then get back with me......



  4. #4
    Registered
    Join Date
    Dec 2011
    Location
    United States
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default Re: FADAL 88HS POST VER 29

    Spock,

    From the Fadal Manual:
    N3 G83 G99 R0+.1 Z-1.2 F10. Q.1 P.02 X-.50 Y-.35

    From BobCAD:
    G83 G98 Z-.7002 R0+.1 Q.25 P.02 F.8342

    The two match exactly, just in a slightly different order, and we exclude the X and Y on the first line.



  5. #5
    Member
    Join Date
    Jan 2007
    Location
    America
    Posts
    172
    Downloads
    0
    Uploads
    0

    Default Re: FADAL 88HS POST VER 29

    Sean,

    Maybe I have a corrupted post file? Anyway, I grabbed a Fanuc OM post from your library and had it humming in about an hour. I do not have a fresh (non-edited) copy of the Fadal format 2 post here at my shop. I do have it on my other license at home, and I will post you some code and share it with you later.



  6. #6
    Registered
    Join Date
    Dec 2011
    Location
    United States
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default Re: FADAL 88HS POST VER 29

    Spock,

    Here is the post I used.

    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FADAL 88HS POST VER 29

FADAL 88HS POST VER 29