Bobcad post processor for Bridgeport series 2 interact 2 mill
Hi guys anyone have a working post processor for a Bridgeport series 2 interact 2 cnc mill it has the old hiedenhan 151 controller. our bobcad software version is 24 thanks
Re: Bobcad post processor for Bridgeport series 2 interact 2 mill
Cyphertech,
Give this post processor a try. It is an ISO post processor for the Heidenhain.
To use this post processor:
1. Open the zip file in Windows Explorer
2. Right-Click the Heidenhain_151_ISO.MillPst and select copy
3. Open your C-Drive
4. Open BobCAD-CAM Data
5. Open BobCAD-CAM V24
6. Open Posts
7. Right-Click on Mill and select Paste