Build Thread- Free BobCAD Predator Editor Webinar

[Sowen]

BobCAD Predator Editor- This webinar will cover using the predator editor.

Link to register below..
https://student.gototraining.com/reg...33248877343297

Thursday, August 13, 2009 2:00 PM - 3:30 PM EDT
1. Back-plotting
2. Editing made easy
3. RS-232 Communications
3. Customizing Editor
4. Q & A

[Ed from NY]

Interested in 3D as well, but I picked high speed pocketing not only because of the related feature, but because I also wanted to know how can we use the options in the regular BobCad features to optimize the generated code. Let me know if you would like to know specifics and I'll send you a private PM/email.

Thanks.

[GaryCorlew]

I read somewhere that these will be posted on youtube, has this happened? if not then when? I work till 5:00 pm eastern time and I will never be able to watch them until they are posted

[Ed from NY]

I would like to change my vote from "High Speed Pocketing" to "4 Axis Machining" because it turns out that even though I have the Pro version it does not include the HSP feature -- which it was explained to me is a separate module licensed from VoluMill.

Thank you.

[Tsooko]

Hi all
I took in two of Bobcad webinares, begining v23 and Bobart. Enjoyed them very much. In the invite, we were supposed to be able to record the webcast but it turned out not to be so. So I too hope that these will be played someware so we can view them as i have forgotten how to do many of the functions shown.

Ted

[john_rabbit]

in bobcam i would like to see mastercam covered

[Sowen]

Originally Posted by GaryCorlew I read somewhere that these will be posted on youtube, has this happened? if not then when? I work till 5:00 pm eastern time and I will never be able to watch them until they are posted

Unfortunately YOU TUBE has limited the size of the videos that can be posted to just 10 minutes. We are instead using gotowebinars hosting you can view previously recorded webinars on by going to the BobCAD website ..

http://bobcadsupport.com/
Click the webinar tab.

[Sowen]

Originally Posted by john_rabbit in bobcam i would like to see mastercam covered

Hah.... , did it take you all day to figure that one out ?


Seriously though, these webinars are to help those using BobCAD and to answer questions for those that are interested in BobCAD, If you are a skeptic maybe you should watch or partake in one of these webinars. This is a great chance to get straight answers to all of your questions and concerns. Skeptics are more than welcome to join in on a webinar.

[Tsooko]

Sowen
Thanks, link works well.
Ted:

[mcphill]

These appear to be exactly the type of "training" data that I wanted to view prior to purchasing BobCAD. MUCH better than anything else I have seen offered by BobCAD themselves, finally approaching the thouroughness of Sorin's "Open Source" training efforts. PLEASE continue this series, and keep it open to anyone and everyone who wants to see it!

[mcphill]

Why? I have BobCAD....

[mcphill]

After watching the webinar, I had NO problem doing this today:

http://public.fotki.com/mcphill/mcpi...aus-engraving/

Easy as pie!