No data to verify

[p&ccnc]

Why would I be able to generate a tool path, and then not be able to verify the tool path?

[Allen123]

That's a good question.

What version are you running?

What I would do in un install predator software.

Then re install from the system sub folder in the V22 or V23

That should fix the problem

[p&ccnc]

We are using V23. I have a suspicion that the software didnt load completely because I Had loaded onto a laptop then had to move to PC because of graphics card issues. I will try uninstalling and reinstalling. Thanks,

[The One]

Uninstalling and reinstalling isn't necessary.

The reason that there is no data to verify is because the directory that BobCAD is saving the data to, is inacessible to Predator. You just need to tell BobCAD where to put the files.

Click on Preferences => Settings Default.
Then click on the Directories option, on the left.
You will see an option for Project Directory, click on the button to the right of the field. You will then need to direct this option to "\\Program Files\Predator Software\Common Files\Jobs".

Once this is done, click OK and you should be able to verify just fine. If this doesn't work, then you can try the reinstall, but I doubt you will have to.

Regards