Need Help!- Many V23 Functions do not work

[orbimachine]

Our IT guy thought it was a good idea to upgrade from V19 that was working to V23 which only partially works, so lets start picking off the problems.

I watched the training video on setting up milling tools but when I set up a new tool it never gets saved and always reverts back to the preprogrammed tool.

Also I can not get the offset function to do anything.

[skullworks]

An Upgrade for V19 would have been V21.

V22 and on is a whole new ball of wax...

[tjones]

Have you read the manual?

The offset tool and other tools now work a little different.

1) select the tool first (geometry will deselect)
2) set desired settings and click OK (like hitting apply)
3) select geometry
4) right click selected geometry and click OK

[gn3dr]

Originally Posted by orbimachine Our IT guy thought it was a good idea to upgrade from V19 that was working to V23 which only partially works, so lets start picking off the problems. I watched the training video on setting up milling tools but when I set up a new tool it never gets saved and always reverts back to the preprogrammed tool. Also I can not get the offset function to do anything.

I think you might be doing something wrong on adding tools. They do add OK - you need to hit return or OK after youhave entered all the detail. I think you might be hitting the "Add" button after entering your data. ( I know because I was originally doing this too)