Need Help!- bobcam v12.5.2

[vividdezigns]

I am curious how you get the cad model part of the software to visually show g code manually writein by hand in the other section of the software?

We have a cnc mill table that we write alot of g code to run a cutout of a trach can lid, but i cannot get it to show me the line cuts or cut paths int he cad model side of the software. I did not make a 3d model of any of this again it is all writen in manuall hand code.
Thanks Alot
JC

[moldmker]

Assuming you mean v21.
On the Cam side, highlight the code you want to backplot (CTRL+A if you want it all)
While it's still highlighted, select Edit > Geometry from NC.

Should produce toolpath on Cad screen.

Good luck,
moldmker

[HMB3000]

if your running V21 5.2 there is an update at bobcad for v21 5.3

[vividdezigns]

Thanks guys i have updated and my issue is now fixed. It is showing me the cut paths.
Thanks alot.
Now i have an issue with win cnc v 2.2 and practical cnc.
Trying to get the start button to work. tells me the file i identified is not found, but i can do a manual command to run it and it is runs.



HMMMMM...