Could Bob CAD/CAM work with 6 axis robot??

[calkai1]

Someone has recently purchased a fanuc robot s series with r-g2 controller to carry out profile cutting of steel. It is a six axis robot and he has been told that Bob Cad/CAM would be a suitable software for this purpose. Is it true???
I have no ideal about what the robot is. Could someone help my friend to find the answer for purchasing a suitable CAM??

Thanks in Advance!!!


Tom

[whiteriver]

I just bought a 5 axis Fanuc robot laser cutter. I would be interested if you found answers to your question.

Donny
www.whiterivermfg.com

[Mac T. Knife]

Here is a list of available post processors for 18, and 19.

http://www.bobcad.com/posts/

[CNCdude]

Hi Tom,
BobCAD-CAM software is not capable of creating 6 axis toolpath and g-code at this time. We will however do 2, 3, 4 and limited 5 axis toolpath. If the machine accepts a g-code program, odds are, we'll handle it. Download our free demo from www.bobcad.com and have a look. If you need any assistance just call us or email us.
Sincerely,
CNC Dude

[avongil]

No way, the only cam program on the market that can truly program 6 - 8 simultaneous axes is Mastercam + Robotmaster. Its simply incredible.

You use mastercam's powerful 5 axis toolpath to drive the end of arm tooling, then the robotmaster add on to control the robot orientation right inside the toolpath.


http://www.robotmaster.com/

Call up those guys if you need a programing solution. Its really your only choice.