crashware

[jmcglynn]

Just an update, I spent some time on the phone with "The One" and he was really helpful. We were able to get one part working by turning off subroutines and using 2D operations instead of Z-Level. I had to block holes with a temporary surface because the toolpath was diving into the hole even though I'd indicated not to do that, maybe a result of having a chamfer on the hole in the model.

I still have issues with other parts, hopefully we'll be able to work through them.

Joe

[tjones]

Doesn't seem to be ignoring holes when posting. To easily block hole simply extract the edge and create a surface using that edge.