LinkBack URL
About LinkBacks
You'll need to call BobCAD to get that information. I'd get it in writing, too.
| | |
What is involved in purchasing a seat of Bobcad from an end user? Is the license transferable? If so what is required to transfer the license?
You'll need to call BobCAD to get that information. I'd get it in writing, too.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
What ger21 said and the fee I believe is like $40. You will have to send the Dongle if V22 and they will return it with your name in the License Key.Originally Posted by questcars
If it is a previous version I think it will have to be deauthorized on one PC then reauthorized on the new PC.
Cheers!!!!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
The transfer fee is $75 and expect to get passed around from person to person a lot when they find out that your not buying a new copy from them.
I called BobCAD about this before buying a "used" copy. Now that I have bought a copy of Ver.20 off of eBay, they don't really want to talk to me until the PO calls them and deauthorizes it.
Yesterday I ask a tech about this. He made it sound like it was no big deal. He said to call and tell them who the new owner is. He never mentioned a transfer fee.
Rob in Ohio
If you need to transfer ownership all you need to do is call the front desk, let them know, and they will transfer you to Customer Service and it will be taken care of. It's not a big deal at all. You can call me direct if you would like to and I will set you up.
Thank you!
Brian Oliver Ext 132
Phone: 727-489-0003 Email: boliver@bobcad.com
Posting Permissions
| | |
