Ghost keeps turning on lathe output.

[Jim Estes]

I have been having a problem for the last few days. I will be working right along doing my milling and all of a sudden I will look and the coordinate output has Z travels all over the place. Seems somehow the coordinate output is getting switched over to lathe output.

I have to go into Environment and the Coordinate and uncheck the Lathe option. Then re-do my work.

It keeps doing this to me.

Think I got a virus or a ghost?

Jim

[tobyaxis]

What Version of BCC are you using? This looks like a Tech Support Issue, you may want to call BobCAD.

[Jim Estes]

It's version 21.

At first I thought I was miskeying something and hitting some sort of hotkey and changing it, but it did it all on it's own a few more times.

Jim

[tobyaxis]

It's version 21.

At first I thought I was miskeying something and hitting some sort of hotkey and changing it, but it did it all on it's own a few more times.

Jim

Jim,

Your going to have to call BCC Tech Support. I have never heard of BCC V21 doing this.

Call them, they will be able to help you solve this issue.

[The One]

Sounds like you have a command in your start Script that is doing it. Like Toby said, call support. They willbe able to idnetify the issue.

Regards