post processor for X-Carve

[nivlek]

Any help would be appreciated

Would anyone know if there is a post processor for the X-Carve machine ??

regards
Nivlek

Similar Threads:

• Need Help!- Post processor for Fanuc Oi mate -TD post processor for lathe for NX or Edgecam
• Lost Machine and Post Processor lists in Post Process

[magicniner]

Have a look at this -

https://inventables.desk.com/custome...el-g-code-spec

The main thing that's "non-standard" about their implementation of "standard G-Code" is that it doesn't support arcs so you need any arcs to be split into a gazillion little straight lines.