Originally Posted by
BigC
I'm having trouble with BOBCAD generating a G2 or G3 inputting I0 and J0 in code lines. I have a Haas VF2 Using BC V24. The program is small engraving with intricate moves. I'm guessing I can make a change in the post, but don't know what line. I have given 1st few lines of code if that would help to understand my problem. The problem line has been separated out. This is just a sample section, there are hundreds more lines with I0, J0. Thanks for the help
T01 M06
G00 G90 G54 X.3817 Y-.5304
S10000 M03
G43 H01 Z.1 M08
G01 Z-.003 F48.
G02 X.296 Y-.526 I-.032 J.2099 F80.
X.2503 Y-.5073 I.047 J.1799
X.2146 Y-.479 I.077 J.134
G00 Z.1ss
X.2503 Y-.5073
X.3218 Y-.3939
G01 Z-.003 F48.
******* G03 X.2504 Y-.5109 I0. J0. F80.********
X.2691 Y-.5206 I.0811 J.133
X.3075 Y-.5326 I.0732 J.1671
X.38 Y-.5355 I.0461 J.2377
G01 X.3886 Y-.5344