thanks I'm looking for a little more detail. I am coming along fine with the stl I have a;ready...I can buy one in an stp format but the detail is not there. I've been building bikes sense 1978, This is going on the bike representing my shop. now that I have the time and resources, I'm going to build a working file with as much detail as possible... Thanks again....
The end result is directly connected to the effort applied
ok,,I guess your direction now is FreeCad ?
I also am thinking or assuming that you are using 4th axis ?
If that is correct,I am out,,,Nick and Burr would be better to help you
I quite like targeted ads if they're not intensely annoying so I'll enable ads when your advertisers stop using annoying sounds, annoying slideshows and annoying animations
I quite like targeted ads if they're not intensely annoying so I'll enable ads when your advertisers stop using annoying sounds, annoying slideshows and annoying animations
I'm posting this in hopes someone with the same problem can over come it by using my labor so you wont have to...... The answer to my problem was to use "emboise from component" in bobart .....
The end result is directly connected to the effort applied
Cool,,,,love to see the finished product