I need to modify my post for a FANUC 6T-B, I haven't yet figured out how to get type II roughing so I need the Z axis moves removed from the start of G71 turning cycles. I've attached some code with the 'offending' move
%
O100
(110 SEAL RING)
G70 G40 G97 G99
G28 U0 W0
G50 X10.6500 Z9.5600 S1500
T0100(TOOL #1 ) <<< is there a away to get the post to do this rather than T0101 (this was manually edited)
G00 X6.2 Z.0793 T0101 G96 S500 M03
M08
G00 X6.
G71 P1 Q2 U.03 W.01 D0500 F.015
N1 G00 X3.8765 Z0. << need to remove Z0. from this line
G01 X4.0765
X4.1078
X4.6937
G03 X4.725 Z-.0156 I0. K-.0156
G01 Z-.184
X5.488 Z-.3027
G03 X5.51 Z-.3176 I-.0046 K-.0149
Also, is there a way to call the tool description instead of just TOOL#1 as in this tool call