Need Help! FANUC 6T-b post


Results 1 to 1 of 1

Thread: FANUC 6T-b post

  1. #1
    Member L98FIERO's Avatar
    Join Date
    May 2003
    Location
    Keswick, Ontario
    Posts
    241
    Downloads
    1
    Uploads
    0

    Default FANUC 6T-b post

    I need to modify my post for a FANUC 6T-B, I haven't yet figured out how to get type II roughing so I need the Z axis moves removed from the start of G71 turning cycles. I've attached some code with the 'offending' move

    %
    O100
    (110 SEAL RING)
    G70 G40 G97 G99
    G28 U0 W0
    G50 X10.6500 Z9.5600 S1500
    T0100(TOOL #1 ) <<< is there a away to get the post to do this rather than T0101 (this was manually edited)
    G00 X6.2 Z.0793 T0101 G96 S500 M03
    M08
    G00 X6.
    G71 P1 Q2 U.03 W.01 D0500 F.015
    N1 G00 X3.8765 Z0. << need to remove Z0. from this line
    G01 X4.0765
    X4.1078
    X4.6937
    G03 X4.725 Z-.0156 I0. K-.0156
    G01 Z-.184
    X5.488 Z-.3027
    G03 X5.51 Z-.3176 I-.0046 K-.0149

    Also, is there a way to call the tool description instead of just TOOL#1 as in this tool call

    Similar Threads:
    Last edited by L98FIERO; 10-18-2017 at 11:04 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FANUC 6T-b post

FANUC 6T-b post