Reply with QuoteMight just think of it as drill and give it a couple of pecks to that depth or single peck what ever you prefer
it will just thinks a glorified single flute drill
I used .190 depth as sample but use what ever depth your math calks at .165
need to know how to cuntersink in V27
I need help. I have to counter sink 2 holes with a 90 degree 1 flute counter sink.
How is this done in V27? Hole diameter will be .331 and i am using a .500 counter sink. Math says I have to go .165 deep to get the width of .331
I cant find out how to program bobcad to do this...what am i missing?
anyone?
Big Chipin, spreading tha cheese, I be Big Chipin for days!
Re: need to know how to cuntersink in V27
Might just think of it as drill and give it a couple of pecks to that depth or single peck what ever you prefer
it will just thinks a glorified single flute drill
I used .190 depth as sample but use what ever depth your math calks at .165
Last edited by RAF.; 09-10-2017 at 02:50 PM.
