I would think you would get a rough bottom finish (scallop) unless using very small dia cutter with very small step over
Might be faster to set body at 1 degree angle and cut neck pocket then lay flat and cut body contour
Sustain Sustain
Just a thought
Checked your last post looks pretty good to me from my calcs
.250 cutter at .100 step over @ 1deg = .0002 scallop
.250 cutter at .100 step over @ 3deg = .0007 scallop
.250 cutter at .100 step over @ 5deg = .0011 scallop