BobCad V29 Arcs sectioned

[Daniel_Laser]

Hi, im programming with the BobCad V29 my laser machine, i use dxf file but when i have an arcs on my
drawing the cutting was in section and not make the radius.
I made my files in solidworks but when i open the dxf on Bobcad the arcs appear in sections.

Similar Threads:

• Can I use Fusion 360 to produce sectioned (sliced) cutting files
• Need Help!- Camsoft & Bobcad - problem with arcs
• MadCam and grasshopper - automate sectioned region curve operations
• Need Help!- Bobcad V24 & Camsoft & arcs
• Sectioned linear rails ok or no?

[SBC Cycle]

Hi, im programming with the BobCad V29 my laser machine, i use dxf file but when i have an arcs on my
drawing the cutting was in section and not make the radius.
I made my files in solidworks but when i open the dxf on Bobcad the arcs appear in sections.

Hi Daniel, try running the function "Reorganize" on your geometry after opening/merging in the dxf. It's also possible when exporting from Solidworks it is converting your arcs into segments. Check those settings as well. I'm not quite clear on the nature of your problem from the description you gave. Got a file sample you can upload?

[BurrMan]

I made my files in solidworks but when i open the dxf on Bobcad the arcs appear in sections.

In solidworks, when you choose to export and select dxf, choose "options". In the dialogue, select dwg/dxf and then in the dropdown, try R14 as the version.

The file would help.