Re: Bobcad is painfully slow on any computer V26 also tested demo V29. Why?
Hi Burrman
Sorry for the miscommunication ! I have a desktop computer that is small format that I was wondering about a video upgrade without breaking the bank?
Thanks GD
Re: Bobcad is painfully slow on any computer V26 also tested demo V29. Why?
Hi Burrman
Thanks for your help ! :-)
GD
Re: Bobcad is painfully slow on any computer V26 also tested demo V29. Why?
I have tried both a GTX card (older 450 1MB) and a Quadro K5000 in my setup. The old GTX actually ran stuff faster then the k5k. But I also found that the GTX was less stable and crashed more. Could be that the K5K has ECC memory, not sure.
I really wish BCC would utilize more cores on the ECU though. Would help speed things up tremendously I would think.
Re: Bobcad is painfully slow on any computer V26 also tested demo V29. Why?
[QUOTE=HPbyGD;2031866]Hi Burrman
Sorry for the miscommunication ! I have a desktop computer that is small format that I was wondering about a video upgrade without breaking the bank?
Thanks GD[/QUOTE]
Just did that.
I had already checked that all the hardware in the dc5850sff was supported in WIndows 7 and I've just put a new ASUS NVIDIA graphics card in a 7 year old small form factor HP Compaq desktop, I looked in the box and ensured the card was half height before buying it, half height end plates are available on eBay.
At the same time I flashed the BIOS to the latest version which supports the Phenom 4 core processor I bought and will support 4Gb DIMMs.
:D
Nick