| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| BobCad-Cam Discuss all BobCad software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-02-2007, 03:38 PM
| |||
| |||
Would you guys look at this file and see where I'm messing up? :-) When I post the code, my deepest -Z cut is only .1875", and it should be at -.25. I can't seem to figure out what I'm doing wrong. If I use the translate function and move the top face of my part to -.0625 below Z, then my -Z is correct at -.25 for the deepest cut. Weird.    |
|
#3
02-03-2007, 02:13 AM
| |||
| |||
| Dfennell, I loaded the DXF into bobCad. The top surface is at Z = 0.0619. The bottom surface is at Z = 0.1875. Move the whole object down 0.062 and then the top will be at 0 and the bottom at 0.250 Gene |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Toolpath question | COPO427 | Mastercam | 3 | 11-15-2006 11:37 AM |
| How do you create this toolpath? | squarewave | Mastercam | 15 | 10-17-2006 08:40 PM |
| Picstep 4 Toolpath | elogicca | PicStep Controllers | 3 | 07-21-2006 11:24 PM |
| Project Toolpath on STL | Sanghera | Mastercam | 7 | 03-12-2006 07:43 PM |
| Help with producing a 3D toolpath | ngr1 | Mastercam | 11 | 12-26-2005 10:31 PM |
| | |
Linear Mode
