Page 1 of 2 12 LastLast
Results 1 to 12 of 17

Thread: V19 printing?

  1. #1
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0

    Angry V19 printing?

    My version 19 is on a clone running 2000pro, I have a HP Deskjet 1220C connected with a USB cable.

    My printer works fine with all other applications, but BobCAD V19 seems to split the screen image and print it backwards (ie. Top 50% on bottom, and bottom %50 on top).

    Anyone else having this issue?

    Thanks
    "Plan your work; Work your plan"


  2. #2
    Registered Jennifer's Avatar
    Join Date
    Jun 2003
    Location
    San Diego, CA
    Posts
    129
    Downloads
    0
    Uploads
    0
    Sounds like you're just holding the paper upside down...I'm kidding. I haven't heard this one - they were having some printing issues, but I thought this was taken care of in the last patch. Have you downloaded the patches?

    Jen
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0
    Hmmm,

    The patches?

    Probably not the one I need,

    Thanks Jen,

    Kenny
    "Plan your work; Work your plan"


  4. #4
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0
    It's nice when you send BobCAD Support an E-mail regarding there most recent patch and they don't even respond...
    "Plan your work; Work your plan"


  • #5
    Registered Jennifer's Avatar
    Join Date
    Jun 2003
    Location
    San Diego, CA
    Posts
    129
    Downloads
    0
    Uploads
    0
    Send an email to Chris (CNCdude) directly - he's pretty quick about getting back to you...chris@bobcad.com
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  • #6
    Registered cely's Avatar
    Join Date
    Nov 2003
    Location
    Horseshoe Bay, TX
    Posts
    49
    Downloads
    0
    Uploads
    0

    V19 Updates

    I agree, contact CNCdude about your problem. He is "da Man" in my opinion. But, in the mean time, go to...

    BobCadSupport

    You will see info about two V19 software updates.

    V19.00.001 posted 11/20/03
    V19.00.002 posted 12/01/03

    I check this forum daily to make sure I get the latest updates as soon as possible.
    Poor planning on your part does NOT constitute an emergency on my part!


  • #7
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0
    Thanks for your help, both patches did not do the trick. I will try to get a hold of Chris.

    Sometimes it's easier just to work around the problem.

    Please don't think that my intention was to bash the BobCAD folks. I am sure they are busy, and I have not pressed the issue with them. The support staff has been good to me when I do call 'em.

    Thanks,
    Last edited by inthedark; 02-06-2004 at 09:07 PM.
    "Plan your work; Work your plan"


  • #8
    Registered
    Join Date
    Jul 2003
    Location
    usa
    Posts
    41
    Downloads
    0
    Uploads
    0
    My guy check a day or so ago and still no update avaliable for us to print w/ V19
    Jim
    www.picopascal.com


  • #9
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0
    Ok, thanks Steele. I'm glad I am not the only one.

    Kennys,
    "Plan your work; Work your plan"


  • #10
    Registered
    Join Date
    Jul 2003
    Location
    Denver, CO
    Posts
    26
    Downloads
    0
    Uploads
    0

    I have the same problem

    I am running Win2000 and trying to print to a Lexmark Z54 printer. I get the following error:

    The exception Breakpoint
    A breakpoint has been reached.
    (0x80000003) occured in the application at location 0x77fa144f.

    Click on OK to terminate the program.
    Click on CANCEL to debug the program.

    Any ideas?


  • #11
    Registered inthedark's Avatar
    Join Date
    Jan 2004
    Location
    Springfield, MO
    Posts
    133
    Downloads
    0
    Uploads
    0
    Hey Mike,

    at leat you are getting error messages. As far as I know, they are working to resolve the printing issues.

    I have not heard back for about a week now.

    to work around it I just do screen shots and paste it into a word doc.
    "Plan your work; Work your plan"


  • #12
    Registered
    Join Date
    Jul 2003
    Location
    Denver, CO
    Posts
    26
    Downloads
    0
    Uploads
    0

    It's printing

    I just received an email that the latest patch (19.00.003) is out.
    I've installed it and am now able to print.

    Thanks


  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Help using V19 for engraving Text
      By rustyolddo in forum BobCad-Cam
      Replies: 4
      Last Post: 03-10-2005, 12:54 PM
    2. Best place to buy v19?
      By gaspard in forum BobCad-Cam
      Replies: 1
      Last Post: 11-19-2004, 10:53 AM
    3. pcboards and screen printing
      By lurch in forum General Electronics Discussion
      Replies: 1
      Last Post: 10-17-2004, 02:40 AM
    4. Looking for bobcad V19 Manual
      By Biggermens in forum BobCad-Cam
      Replies: 1
      Last Post: 10-06-2004, 04:55 PM
    5. V19 purchase
      By converterk in forum BobCad-Cam
      Replies: 4
      Last Post: 10-01-2004, 09:17 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.