Feed Rate is not included in G01 lines

[orbimachine]

I recently started using vers. 19 after using vers.17 but I am having a problem with generating G01 lines. I set up the linear feed and the plunge rate in Up/Down, but only the plunge rate is added to the line.

Example:
N18G01X+1.927Y-2.135Z-0.02P3

Any ideas on how to get the feed rate instead of the plunge rate?

[ger21]

change the post processor.

[orbimachine]

I a using a postprocessor that I have adapted to my Dynapath controller. It still works for version 17, but not on version 19. Are there any new modifications that I need to make for it to work on version 19?

[tjones]

In your tool depth setting you will see Feed > Normal and Plunge.

Change the values from Pxx to Fxx. (don't forget the period if your control needs it)

[southernexplore]

My post will not insert any feed rates. I have to insert them myself. I have not had BobCad long enough to start changing post but would like to know how.
southernexplorer

[tjones]

Originally Posted by southernexplore My post will not insert any feed rates. I have to insert them myself. I have not had BobCad long enough to start changing post but would like to know how. southernexplorer

See above info. It should work for you as well. Just need to put the values including the F (or whatever your machine requires) with hte feedrate.

[southernexplore]

Got it. It works great.
Thanks,
southernexplorer