new toolpath?

[pchfurniture]

I have a part that I have generated toolpath.
I have 3 features in the cam tree.
I need to move the part an 1/8" in both x & y direction.
The toolpath does not move with it even when I click on
'compute all toolpath. Do I have to to each feature over again?
Help!

Similar Threads:

• No toolpath for saw
• Need Help!- toolpath
• toolpath help
• Toolpath
• Newbie- toolpath in mcx

[jrmach]

Re-select Geometry,then re-compute tool path.

[Force]

Re-select Geometry,then re-compute tool path.

for all 3 features.

[shred]

Generally you can just click the re-select, then ok, without actually having to pick the geometry again. I guess there's a reason to leave the toolpaths where they were when the underlying geometry moves, but I've never found it.

[Forrest C]

Can you not just do an .125 offset of the origin in machine wizard? When you post code it will be according to the stock and part placement. Forrest

[Force]

Generally you can just click the re-select, then ok, without actually having to pick the geometry again. I guess there's a reason to leave the toolpaths where they were when the underlying geometry moves, but I've never found it.

Yes, and again same here.