Moving drawling elements
I have a dxf file I have opened in BCC and it is located at like 5,7
How can I move it so the bottom left corner is at 0,0?
Step1. Under Edit menu: select entities ALL,
Step2. Under Change menu: click Group
Step3. Again under Change menu: click translate
Step4. There will be box opens for your desired 0,0(x,y) coordinate move.
pick "incremental" and enter 5 for x and 7 for y
Step5. Click OK
You should now see your file moved on the coordinate system to 0,0(x,y)
hmmm... or should you enter -5 and -7......
Check it out . you can always quickly undo your last entry and re-translate if you don't get desired results.
After you get the desired results,
Step6. Under Change menu: click un-group to free the entities.
Hope this helps,