first of all, sry If its an absolute obvious question (and I hope so)
But im fairly new to this.
Today I calculated my first paths in bobcad/cam on an external stl model
I used advanced roughing and the paths are just fine.
I downloaded the metric mach3 postprocessor and also set the NC-path correctly
The problem is that it only outputs this:
Can anybody give me a hint what Im doing wrong?
(BEGIN PREDATOR NC HEADER)
(MTOOL T1 S1 D10. H80. DIAM_OFFSET 1 = 5.)
(SBOX X0. Y0. Z-20. L220. W60. H0.)
(END PREDATOR NC HEADER)
(PROGRAM NAME - MSSWORDNC)
(POST - MACH 3 MILL NO ATC METRIC)
(DATE - WED. 10/12/2011)
(TIME - 01:24AM)
N01 G21 G40 G49 G54 G80 G90 G91.1
(JOB 1 ZLEVEL ROUGH)
(FEATURE ADVANCED ROUGH)
N03 S2 M03
(END OF PROGRAM)
Thanks and greetings from Vienna!
//Edit: And no this is not the demo! (but it behaves like it.., maybe there is something wrong with the licensing)