I am having trouble with a new machine. I downloaded the Hass TM rev1 post from the BC site but I am not getting the required "%" at the beginning and end of the program. The Gcode is also missing, what I believe is required, a ";" at the end of each line. If anyone knows where there is a working post on the BC site or if you have one or if you can direct me on how to modify my Hass post and make it work. I need to get some work on the machine as soon as possible...THANKS! I am running BC V21.2
The ";" is usually automatically appended by the machine control and not needed in the file sent to the machine , the "%" is needed if your sending the file using predator via RS-232 predator can add these lines. If not you will need them . They can be hard coded into the post , open the post using windows notepad. Under line 0. in the post place a "%" do the same for line 24.