- New Machine Build- 600mm Box bend brake (Finger Brake, pan Brake)
-
Member
Hi Eling,
Sorry my progress is so slow. I tend to get sidetracked, so my projects take long paths to completion.
In the first post their is a link to the woodworking forum thread where Simco posted his original design. In that thread there is detailed advice about making it, mods for more capacity, and photos of two built brakes.
I suggest you sign up to that forum (it uses the same PHP forum engine as this one, so it works just like CNCzone).
-
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Slight project delay later, today I finished machining the side plates, and one of the leaf pivots. Still plenty to go. At this rate I should be finished in summer 2020.
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Made a little more progress. The apron is finished except for the lifting handle. I have been teaching myself to weld with the help of you tube, and practice. Welded the stifferner to the main bed and then welded the feet onto the side plates. Got a bit of undercut on the angle welds. The next thing I need is at least two fingers and clamps, to be able to position and weld the upper angle beam. Then there is the clamping handle still to do.
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Got a bit more done lately. First machined two fingers, as you need them to set up the upper bar. Then welded that bar in place. I am at that stage of self taught welding where I pat myself on the back for a lovely weld, and the next one I' am cringing and wondering how I can take photos so no one sees it. The welds on the back of the lifting bar which no one will ever see are wonderful. Trust me. The most obvious weld at the top front look like ****.
I then got about half way through milling the rest of the fingers. Once that is done, I just need to make the clamping lever, and its drive dogs to the bar under the bed and it is finished. Could well be this year.
-
Registered
Re: 600mm Box bend brake (Finger Brake, pan Brake)
is there a copy of the plans for this machine? I tried to click the link but got a dead-end. CAD or PDF would be awesome.
Carl
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
That woodworking forum was still active last month. Maybe they are just doing server maintenance.
-
Registered
Re: 600mm Box bend brake (Finger Brake, pan Brake)
if you delete everything except the main address you get the message below.
The domain woodworkforums.ubeaut.com is for sale. To purchase, call BuyDomains.com at 339-222-5114 or 866-866-2700. Click here for more details.
-
Registered
-
Registered
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Thanks a lot. I find this very useful, I'll try to make one with some modification to suit me.
Regards,
elbannan
-
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
I finally finished the bend brake. Well, nearly, I could only make 12 finger clamps in one sitting, as my mill only has 300mm of travel. Turns out I need 13.
Tonight I'll go get some sheet metal, as we need a new letterbox.
-
Registered
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Congrats on completing it! I would be interested to know what thickness you can reliably bend at full width once you get to test it. I've got a finger press break, but it's a bit narrow and would like to build something wider.
Have you seen DXF files available for these pieces?
-
Registered
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Holy cow and it only took 7 years! , think i will drop the 200 bucks for a grizzly 12" nice work! its a beauty!
-
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
Hi Guys,
Thanks for the kind words. The plans are in pdf in Bents posting #28 above. I haven't seen DXF's of the parts, but they are all very simple could be quickly redrawn, if needed to get them lasered. That would cut about 6 1/2 years off the build time.
-
Member
Re: 600mm Box bend brake (Finger Brake, pan Brake)
The original thread is still available in the wayback machine
https://web.archive.org/web/20080805...ad.php?t=45792
- New Machine Build- 600mm Box bend brake (Finger Brake, pan Brake)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules