Anyone else ever run into a communication error between the computer and ETS 3000? We have run out of options as far as testing what we can.

The computer still boots and runs fine from what we can tell. Communication wires to the board all test good for continuity. Board runs when installed on other brake with ETS100.

We have tried moving COM1 to COM3, but no luck. From what the dealer has told us, our testing narrowed down to replacing the entire ETS3000 system for more than what the brake is currently worth.

Any help or pointers will be greatly appreciated. Thanks!

Machine is about 10 years old. 8'.

Similar Threads: