newbie, to bending machines


Results 1 to 8 of 8

Thread: newbie, to bending machines

  1. #1
    Registered
    Join Date
    Jun 2013
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default newbie, to bending machines

    hello,

    I want to know which kind of systems is used behind in order to bend metal.

    press or motor?

    any schema or project log will be welcome

    I appreciate so much your help
    regards

    Similar Threads:
    Attached Thumbnails Attached Thumbnails newbie, to bending machines-bender1-jpg  


  2. #2

    Default Re: newbie, to bending machines


    servo motors



  3. #3
    Registered
    Join Date
    Jun 2013
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: newbie, to bending machines

    thank you for the reply
    do you have any idea about the caracterstics of the servo motor ?



  4. #4
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: newbie, to bending machines

    It depends on what sorts of things you're trying to make. For an old-fashioned but versatile and effective solution, look up the Hossfeld bender; with the right accessories, you can do all sorts of bending tasks: Tube Bending Machines | Metal Benders & Bending Dies | Hossfeld UNIVERSALâ„¢ Bender, Winona, MN

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  5. #5
    Registered
    Join Date
    Jun 2013
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by awerby View Post
    It depends on what sorts of things you're trying to make. For an old-fashioned but versatile and effective solution, look up the Hossfeld bender; with the right accessories, you can do all sorts of bending tasks: Tube Bending Machines | Metal Benders & Bending Dies | Hossfeld UNIVERSALâ„¢ Bender, Winona, MN
    thank you

    but i want to have an idea about the needed parts in order to make a homemade cnc bender. i have an experience with cnc tables



  6. #6
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: newbie, to bending machines

    Again, if you're asking us for a list of parts required to make a bender, you either have to show us a design, or at least specify what you want to bend and how.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  7. #7
    Registered
    Join Date
    Jun 2013
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: newbie, to bending machines

    Quote Originally Posted by awerby View Post
    Again, if you're asking us for a list of parts required to make a bender, you either have to show us a design, or at least specify what you want to bend and how.
    hello

    I want to bend the concrete iron as you can see in the attached image.
    for the method, i prefer to use the same method as the one shown in the video below.

    thanksnewbie, to bending machines-iron-jpg



  8. #8


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

newbie, to bending machines

newbie, to bending machines