Need Help! Brake Press capabilities


Results 1 to 3 of 3

Thread: Brake Press capabilities

  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Brake Press capabilities

    Cincinnati 175 CB x 10ft.

    I'm trying to hold .01 on bends with this 30 year old press. It is inconsistent and takes forever to come close. Should this tolerance be possible? would it be worth paying a tech to look at the machine?

    Similar Threads:


  2. #2

    Default Re: Brake Press capabilities

    sound like valve problems



  3. #3
    Registered
    Join Date
    May 2015
    Location
    United states America
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bucknutz View Post
    Cincinnati 175 CB x 10ft.

    I'm trying to hold .01 on bends with this 30 year old press. It is inconsistent and takes forever to come close. Should this tolerance be possible? would it be worth paying a tech to look at the machine?
    That was a good brake in its day and very capable of holding .010 tolerance I am not a service tech but sounds like the problem is likely a weak backstage motor/servo and is in need of some TCL good luck.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Brake Press capabilities

Brake Press capabilities