Need Help! LVD PPEB 60/15 with MNC 95C control


Results 1 to 7 of 7

Thread: LVD PPEB 60/15 with MNC 95C control

  1. #1
    Registered
    Join Date
    May 2007
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default LVD PPEB 60/15 with MNC 95C control

    Does anyone out there have any ideas as to what might be causing the pressbrake to "shudder" on the downstroke - no problem during the freefall part but once it passes the mute point it seems like the pressure isn't being maintained. Also the machine won't calibrate the tool in "Production Mode". Any suggestions gratefully received!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2007
    Location
    U.S.
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default

    Give LVD a call they should be able to troubleshoot it... I was up at their facility last week in Buffalo... Most parts are being made in the usa now...



  3. #3
    Registered
    Join Date
    May 2007
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Thanks ...

    Thanks for the suggestion .... unfortunately we aren't based in the USA.



  4. #4
    Registered
    Join Date
    Dec 2007
    Location
    U.S.
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default

    Well their also from Belgium so you should be able to call them there also... I don't know why except if maybe you were low on oil possibly... I would check your pressure valves...

    Quote Originally Posted by hassledone View Post
    Thanks for the suggestion .... unfortunately we aren't based in the USA.




  5. #5
    Registered
    Join Date
    Dec 2007
    Location
    U.S.
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default

    I was at there facility today... They are more then helpful if you give them a call..



  6. #6
    Registered
    Join Date
    Jul 2012
    Location
    Russia
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Did you change springs on the prefill valves?
    If machine is old, it can be that springs are tired (or broken).
    Better to change both springs on the prefill valves on the old machines. (10 years and more).
    I am sure that your machine will work ok after that a long time.
    timur123@gmail.com


    Quote Originally Posted by hassledone View Post
    Does anyone out there have any ideas as to what might be causing the pressbrake to "shudder" on the downstroke - no problem during the freefall part but once it passes the mute point it seems like the pressure isn't being maintained. Also the machine won't calibrate the tool in "Production Mode". Any suggestions gratefully received!




  7. #7
    Member
    Join Date
    Feb 2009
    Location
    macedonia
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: LVD PPEB 60/15 with MNC 95C control

    In trumpf v 85 s we had the same problem
    Its propotional valve problem at oure machine and the oil was old roynd 17000 hours
    Chanche new oil new propotional valve and new oil filter
    Machine ok
    Hope you repair yoy machine



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

LVD PPEB 60/15 with MNC 95C control

LVD PPEB 60/15 with MNC 95C control