Need Help!- Ugh, Bad Luck from Day One with G540

[webgeek]

Sounds like you need to optimize your Windows installation for running Mach.

Or just use EMC2
EMC is free and runs great so that seems good enough to me. I develop highly scalable software for a living so I'm not concerned about using Linux. I've already got it up on my network mounting my shared drives. I was surprised at how clean the Ubuntu UI is, I've not used a new X-client for a long time and they've come a long ways. Typically just do everything via an SSH connection.

Thanks again for the help!

Mike

[samco]

Plus you can do stuff like this
http://electronicsam.com/images/Kand...nt4-26ghz1.png

hint - look at task bar. No hickups.

sam

Originally Posted by webgeek Or just use EMC2 EMC is free and runs great so that seems good enough to me. I develop highly scalable software for a living so I'm not concerned about using Linux. I've already got it up on my network mounting my shared drives. I was surprised at how clean the Ubuntu UI is, I've not used a new X-client for a long time and they've come a long ways. Typically just do everything via an SSH connection. Thanks again for the help! Mike

[webgeek]

Now you're just showing off

[samco]

who me?