Upgraded Sherline Mill

[David Da Costa]

As I have long since moved past my CNC Sherline Mill with a KX1 and soon a Novakon NM-135 I am going to put my Sherline MIll on Ebay, but if anyone here is interested in it, please PM me.

The mill itself is in great condition and has been upgraded with A2ZCNC.com long travel x and y tables/base, precision leadscrew upgrade on the x and y using Kerk motion leadscrews and NTBF self-compensating nuts, headstock riser blocks and headstock pacer to move headstock out further from the column..

It has Sherline CNC motor mounts but larger stepper motors from HobbyCNC along with a controller I built using the HobbyCNC pro driver board.

It includes the enclosure seen in the photograph along with the MPG I built on the left side that uses a ModIo board. There is also a bunch of accesories, some never used. Also included is a HighTechSystems rapid tool changer your see in the picture with a couple of tool holders for it.

Not all the tools shown in the photo are included. The way covers are now removed but will be included.

Due to the size and weight it will have to be a local pickup in Los Angeles.

PM me if you are interested.

David