Need Help! Anyone know of a good speed controller? - CNCzone.com-The Largest Machinist Community on the net!

SpeedsCustom · #1 10-05-2009, 11:40 PM

Does anyone know a good speed controller for the specs of a motor such as this:

# 2.6 HP
# 130 Volts
# 15 Amps
# 9200 RPM

And it 1.5 HP at a continuous duty of 95 VDC/1119 watts.

Trying to locate but can't really find "what I think" is acceptable. Anyone have some ideas?

Thanks guys.

-Jason

TOTALLYRC · #2 10-05-2009, 11:57 PM

Originally Posted by SpeedsCustom

Does anyone know a good speed controller for the specs of a motor such as this:

# 2.6 HP
# 130 Volts
# 15 Amps
# 9200 RPM

And it 1.5 HP at a continuous duty of 95 VDC/1119 watts.

Trying to locate but can't really find "what I think" is acceptable. Anyone have some ideas?

Thanks guys.

-Jason

Hi Jason,
We use a bunch of the SE 2000 DC drives at work they have been good to us.
I may have one from a piece of decommissioned equipment if you are interested. PM me.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Is this a good quality lathe and controller?	koja1963	General Metal Working Machines	0	03-29-2008 08:29 PM
which controller is good ?	serkanozfe	General Electronics Discussion	5	04-27-2007 11:36 PM
Need a good/inexpensive motor& speed controller	sleepy23	Mini Lathe	2	07-05-2006 01:36 AM
Controller, Good or Bad	thuffner3	General Electronics Discussion	2	02-15-2004 12:16 PM
Controller good,decent,bad?	thuffner3	General Electronics Discussion	0	12-17-2003 10:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)