Where to buy just Y motor mounts?

[Bluedog]

I have a CNC X2 mill. I bought the conversion parts (Ballscrews, nut, mounts, etc. used from someone and I think he made the mounts himself. The X and Z setup is rock solid, but the Y needs help. It was not great originally and seems to be getting worse. The problem is loose motion in the motor mount and bearing arrangement. I don't want to throw away the X & Z parts, so I would like to buy just the Y motor mount (NEMA 23), bearings, ballscrew & nut. I would machine my own mount, but I don't like how mine is made now and I don't have the means to machine another ballscrew to match up with a different type of mount. Any suggestions where I might buy just part of a kit so I don't end up with extra parts I don't need?
Thanks!

[HackMax]

If the guy made them himself then you're probably going to need pictures and specs on what you have now and then maybe someone could make you what you need.

Rick

[Bluedog]

I really don't want what I have now, I don't think it is a great design. I just want the whole Y axis setup to work with a X2 mill.
Thanks.

[fatal-exception]

Try http://www.cncfusion.com/minimill1.html. They will sell you what you need.

Paul