Need Help!- Looking for eletrical Box and Power Supply.

[SpeedsCustom]

Good read but I already have a PS supply.




Before, I can actually mount the g540 on the enclosure and other holes and slots, I need to get the g540 wired and running just so I can cut the slots.


-Jason

[SpeedsCustom]

Here are some pictures: I hope you guys get the idea. Lots of room and will mount on the wall. Just laid down so I can work on it and secure everything in.





-Jason

[Regnar]

Speeds that is a awful lot of room for the power supply. Are you going to try and mount your computer in there too?

[Fixittt]

how cute its a HP wash tub! lolol I kid. the E stop wires into the g540 on pin 10 to the ground where the power supply goes.
http://www.geckodrive.com/upload/G54...3%20MANUAL.pdf

[SpeedsCustom]

Regnar- No, Computer is on the desk. This will mount to the wall and have hinges so the panel can open and close. Everyone said bigger is better for the enclosure, this perfect. Plenty of room for wires, fans, and air flow. I can then add misc boards too!

Fix- Actually yea, the door came right off my old HP which fits perfectly on this drawer, need to get some hinges and I'm set! Yea the E-Stop goes to pins 10 and 12 on 540 or 12 being the negative off the PS. (Same thing)


-Jason

[SpeedsCustom]

I will be able to get the first cuts done this weekend and will post pictures of the control panel. Looking forward to it! The Gecko540 is fast


-Jason

[JerkyBoy]

Speed Custom,

Did you buy the Gorton Mill yet?

What kind of parts do you machine?

Please post pictures, cant wait to see your work.

JerkyBoy

[SpeedsCustom]

No, not going to. I mean, to much going on here to worry about all that,


I make Paintball parts, need to start making Rc car parts for my brother.


-Jason

[SpeedsCustom]

Finally the weekend! And the coming weeks I can "Finally" get back to playing with the mill and new Gecko 540! For two weeks I have been strapped down to having nice college work ...I mean, i'm not off the hook, I still need to do all the work. But man, exams till the end of October sure sounds nice now Time to play in the shop and make stuff!


Sorry, I HAD to post this



-Jason