Hello, i want build a cnc, and for this, i need a smaller one in order to make
all the necessary parts and support tools.
I have thinked about the proxxon MF70, adding CNC using unipolar motors
with a uln2003 driver, low cost. The bad thing of the MF70 is the small
Y axis of about 46mm, very limited. For the MF70, i have found some conversions plans. Now i have thinked of using this table

http://www.littlemachineshop.com/pro...2008&category=

using it with a mf70 or other proxxon with free stand.
Exist conversion plans for such a table. I would appredicate the double Y axis travel. What do you suggest me to do.

Thanks in advance