DYNA MYTE 2400 - CNCzone.com-The Largest Machinist Community on the net!

helfriwj · #1 02-10-2008, 12:14 AM

I just picked up a DYNA MYTE 2400 Mill and would like to get some info on it any help woul be great
Bill

JimHs · #2 02-10-2008, 02:22 PM

Good little CNC mill. Prettyy straight forward to program from the keypad or by transferring a program from a suitable PC (with a RS232 serial port). Do you have the manual? RS232 transfer program?
Jim

helfriwj · #3 02-10-2008, 06:15 PM

I will need the manual and PC software since the external control panel is missing If you could guide me to where to get these I would appreicate it
Thanks
Bill

JimHs · #4 02-11-2008, 07:39 AM

I can send you a pdf copy of the manual and the software. Click on my user name above (you have to be logged in) and send me a private email with your email address and I'll send you a copy of each.

As for the controller, you need to contact the manufacturer (most expensive option), check on eBay or do a search on this site (or post a thread with what you want), as several have converted their Dyna 2400 to Mach 3 and may have a controller for sale.

Jim

sbstrauss · #5 04-01-2008, 10:45 PM

Hi. i have a DM2400 that i am trying to adapt to a bob campbell breakout board to use with Mach3 s/w. Anyone have a DM2400 driver board schematic?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyna Mechtronics 4400 (DM4400, dyna myte) reference + brochures & photos	ckm	Knee Vertical Mills	190	02-18-2012 12:42 AM
Dyna Myte 2000 mill	BCat	Benchtop Machines	9	09-30-2009 02:44 PM
Dyna Myte 4500 Driver	GEO:s Motor	Engraving Machines	0	04-27-2007 02:26 PM
Dyna Myte 4500 Driver	GEO:s Motor	G-Code Programing	0	04-27-2007 02:13 PM
collets for dyna myte	GARG69	Benchtop Machines	2	05-20-2006 03:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)