Try posting at this link which is where some members do file sharing.
Good luck with the search!![]()
I don't even know where to ask for this, this is the only place I could think of.
Sure appreciate it, in advance, and if there is somewhere else I should be looking, please let me know.
sean@my87.com
Try posting at this link which is where some members do file sharing.
Good luck with the search!![]()
grab it while you can, I posted that a long time ago on the file sharing thread
but it got yanked pretty quick, copyright probably.
I have the pic and gcode on my site at the bottom of this page.
Hoss
Told ya,
Wayne Hill has a cool little program gcode2dxf posted here that will change any gcode file back into a dxf file, pretty cool.
Last edited by hoss2006; 01-26-2008 at 10:06 AM.
http://www.hossmachine.info - Gosh, you've... really got some nice toys here. - Roy Batty -- http://www.g0704.com - http://www.bf20.com - http://www.g0602.com
Yes, cartoon characters are copyrighted material. Do Not post them here or they will get deleted.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
My apologies, and thanks so much for the help anyways![]()