Mutt Machine Motor & Spindle Pulley Combo - CNCzone.com-The Largest Machinist Community on the net!

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > Benchtop Machines
Mutt Machine Motor & Spindle Pulley Combo

Benchtop Machines Discuss all mini mills sherline, taig, square column, round column and CNC mill conversions here!

This forum is sponsored by:

01-22-2008, 02:37 PM

Gold Member

Join Date: Mar 2006

Location: USA

Age: 41

Posts: 100

Mutt Machine Motor & Spindle Pulley Combo

Hello All,
I am making plans for a splindle motor upgrade to my "Mutt" Mill.
Here are the components to be joined in a TBD way:
Spindle:

New Motor:

The physical mounting of the motor should be a piece of cake, the thing I am looking for advice on is what pulley combo to use.

I was thinking about these from taig:

If anyone has any thoughts or suggestions, please let me know.
I would be interested to see if anyone has used a similar combinationand ran into any issues while doing so; i.e. pulley center hole diameter, etc...

I am currently using an old Spectralight spindle motor with a router speed control, and that combination is basically weak and LOUD (sounds like a 747 taking off).

Thanks in advance,
Mike

__________________
Expensive tools can be cheaper than professional therapy

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
power supply/ motor/ driver combo?	freddean2006	DIY-CNC Router Table Machines	3	07-22-2007 12:21 PM
Spindle motor shuts off at start up and resets machine. HELP!	Huntersyv	Phase Converters and VFD	27	04-03-2007 02:50 AM
cnc machine wood &metal combo	lawwdoggy	General Metal Working Machines	3	01-23-2007 12:21 AM
cnc machine wood &metal combo	lawwdoggy	Diemaking and Diecutting	0	01-22-2007 12:21 AM
Looking for a closed loop AC motor/drive combo	pstockley	Phase Converters and VFD	4	12-06-2005 02:40 PM

All times are GMT -5. The time now is 09:34 AM.