Dynamyte 2800 Manuals

[bender88]

I recently bought a DM 2800, and plan to do a retro fit on it. I need the programing and the service-maintenance manuals. I know that I can get them from DM but they want $50 each for manuals and $25 for a Wiring Diagram., so thought I'd try here first, maybe pay someone for copy service.

I was able to download some DM manuals from a college in Mexico but they are all in spanish! These are Bench Mill DM2800, DM2016, Lathe DM3000, and Lathe DM3300-B suplement?. I can share these if anyone wants wants copy.
I also have the DM2400 Programing and the Service and Maintenance Manuals, and the DM2800 Wiring Diagram, which I can easily copy.

I've been benn searching for info and reading all the posts on DM retrofits, trying to get up to speed.
At work I have a 4 axis stepping motor machine that I built for a test stand. It operates from a PC with a National Instruments PCI Stepper / Servo Controller and NI Driver Boxes (IMS modules), 23 frame motors, a GPIB card for Network Analyzer, Programable DVM all controlled by LabView.
Thanks for any help.

[larajq]

I have the manual of dynamyte 2800, but my problems go far beyond the manual. Let's see if you can help and i try to help you too. I trying to set the comunication between my PC aand Mastercam. But I dont know now how to set the dynamite in receiving mode.

[Technite]

I am retrofitting a dm2800 and i really need the manuals. If it is possible can someone upload them? It would be a life saver! Thank You!!!

[chaparro]

hi

[chaparro]

I recently bought a DM 2800, and plan to do a retro fit on it. I need the programing and the service-maintenance manuals. I know that I can get them from DM but they want $50 each for manuals and $25 for a Wiring Diagram., so thought I'd try here first, maybe pay someone for copy service.

I was able to download some DM manuals from a college in Mexico but they are all in spanish! These are Bench Mill DM2800, DM2016, Lathe DM3000, and Lathe DM3300-B suplement?. I can share these if anyone wants wants copy.
I also have the DM2400 Programing and the Service and Maintenance Manuals, and the DM2800 Wiring Diagram, which I can easily copy.

I've been benn searching for info and reading all the posts on DM retrofits, trying to get up to speed.
At work I have a 4 axis stepping motor machine that I built for a test stand. It operates from a PC with a National Instruments PCI Stepper / Servo Controller and NI Driver Boxes (IMS modules), 23 frame motors, a GPIB card for Network Analyzer, Programable DVM all controlled by LabView.
Thanks for any help.

hi bender.
i helping a technical school in chihuahua mexico.
they have a lathe dyna myte model adm3300b but is not working and they dont have any informations, manual, wiring diagram, trouble shoooting guide, compementari info etc.
can you help me whit that infomation or tell me where i can download this information.
thanks and have a nice day
my email is chaparro_1976@hotmail.com
do you have any phone number where i can call you

[bender88]

Hi Chaparro,
I'll look for the DM manuals and info that I have this week. The Spanish materials that I found were on a web site of a school or college in Mexico. I'll look for that link also. I think some of these manuals are not complete, but may be useful to you. I downloaded everything that was available. I can easily foward it to you. I also have some manuals (English hard copies) for the the DM 2400 and 2800 mills. Im retro fitting a DM 2800 using servo motors. My email is moving to a new service, so I'll reply from there later this week.
Bender88

[rickster58]

I have both the service manual and the operations manual in English. I will scan them and post them as a pdf.
Rick<><

my email is rsegraphics@gmail.com

[christzyy]

Hi I am in China, the need for programming manual（PDF）.
Willing to pay, can only through amazon or ebay
There is a doubt, 2800 is the programming language ( BASIC language)? I see a Japanese website written in.
Thank you
804913212@qq.com
DYNA MYTE 2800¹¤ÒµÊý¿ØСϳ - Ä£Ð͹¤¾ßÓëDIY»úеÀ¸Ä¿ - Ä£ÐÍÂÛ̳|Ò£¿ØÄ£ÐÍ|ÎÒ°®Ä£ÐÍ 5iMX.comÖйú×î¾ßÈËÆø¼°Ó°ÏìÁ¦µÄÒ£¿ØÄ£ÐÍÂÛ̳