| | |
Does anyone have a mastercam 9 post that would work with a cnc jr. or supra that they would be willing to share?
Thanks Any input would be appriciated
When you bought the MC 9 program you should have got the post you needed.
If you have changed machines you could contact MasterCam directly and they should be able to help you. JRouche
http://www.mastercam.com/Support/Posts/Default.aspx
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
