spindle motor

[heilcnc]

looking to upgrade the motor on my micro mill to a 1/3 to 1/2hp dc motor 90 volt i have a kb speed control just need motor is there another place like surplus center that might have something like this i do not want to use the 2.25 hp 130 volt motor they got i have one on my mini mill i know i could use a sherline but they are $138 new would like something costing less the micro will be belt drive like my mini is thanks all

[Enraged]

the 2.5hp 130vdc 6750rpm motors from surplus center are actually 1.5hp at 90vdc, about 4000rpm i think. this might make it useable with your kb control, and they are only $20