shaft couplers

[dgalaxy]

where are you guys getting the shaft couplers ive seen some really nice ones on here for doing a direct drive with steppers on bench mills.
kinda would like to know the brand im having a hard time finding them in the msc book. the ones ive seen look really heavy duty

[widgitmaster]

http://www.use-enco.com/CGI/INPDFF?PMPAGE=820

[acondit]

dgalaxy,

I bought the "Lovejoy" couplers from MSC. I found them on pages 3860, 3861. I was connecting a 3/8" shaft to a 1/4" shaft. The part numbers and prices are below (late 2005).
item # your price
35407014 $2.19 ea
Product Description: Three Piece Jaw Couplings Type: Three Piece Jaw Coupling Style: Coupling Hub Maximum Bore Diameter: 3/8 Outside Diameter: 1.08 In. Overall Length: 1.72 In. Material: Plastic

35407097 $1.44 ea
Product Description: BUNA-N SPIDER/L050 HUB L050 JAW SPIDER COUPLING

35407006 $2.19 ea
Product Description: Three Piece Jaw Couplings Type: Three Piece Jaw Coupling Style: Coupling Hub Maximum Bore Diameter: 1/4 Outside Diameter: 1.08 In. Overall Length: 1.72 In. Material: Plastic

If you search by part number it will get you to the right page. Each coupler requires two sets of jaws and 1 spider. You can mix and match shaft sizes within the same series.

Good luck,
Alan

[dgalaxy]

Thanks So much

[voltsandbolts]

I use McMaster-Carr (www.mcmaster.com) They have almost every thing. Do a search for "couplings" .