Mini-Mill Power supply case

[hargray2]

I recently purchased an X2 from Cummins. When I unpacked it, I found the power supply enclosure broken in half a dozen pieces. It looked as though
someone packed it that way, as the crate showed no signs of impact.
Anyway, rather than trying to get a replacement, I decided to just mount
the guts in my own enclosure. I chose an old PC power supply case and it turned out to be better than the original. I only needed to relocate the stand-offs for the circuit board. Everything else just fell into place. I even reused the plastic sheet that insulated the PC power supply board from the case. The fan is roughly 4 times larger too!

[cncdreamer]

Like my grandmother alway said, necessity is the motherhood of invention. Nice work.

Inquiring minds want to know. What the heck was that X2 enclosure made out of?

Regards,
Kent

[hargray2]

The original enclosure was made of the finest chinese plastic
you can buy! It was brittle as heck!

[voltsandbolts]

That's a nice mod, very spiffy!