In need of a part on a tool makers Vise.

[Arich0908]

Im in need of the part in the middle of a tool makers vise . The bottom of the part I need has a pin that goes through it and the top has a 1/4in cap bolt . Its whats on the end of the cap screw when you tighten the vise.
I broke mine. And need a replacement.
If any one has one please let me know.

[kd4gij]

Should be an easy part to make

[txcncman]

Make one.

[neilw20]

Make one. You have a sample, or why do you even need the vice?

[hoss2006]

Well lets ponder for a minute that maybe this is your only vise and it's inoperable to help you make a replacement part.
Check out Mcmaster for a clevis or female shanked rod end to try and fix it.
McMaster-Carr

Hoss