Free OEM PM25/G0704 parts

[SuperFlyLoser]

I posted this a few weeks ago in my build log. I finished converting my PM25MV mill to CNC a few months ago and have started the process of cleaning the shop (AKA: Garage) and though if any zoners wanted any of the OEM parts that I pulled out, they're yours free. If you're in the Portland Oregon area contact me and we can set up a meeting time. If you're outside Oregon I just ask for shipping to your zip, please PM me for details.

The parts are unused as I converted to CNC right away after taking possession of my mill. I know that there were some Zoners that got a shipment of PM25's that were delivered by submarine and had rusted out pretty bad, these might be of some use for you.

SFL

[kd4gij]

Do you still have the X lead screw I need one.


Thanks
Marty

[SuperFlyLoser]

Do you still have the X lead screw I need one.


Thanks
Marty

Sorry,

They were recently given to a local Zoner.

SFL

[kd4gij]

well grizzly is sending me one under warinty. I got the Power feed and the screw threads is to long to install it and I found it had messed up threads about 8 Inches from the left end .never had the table that far over.