I recently bought a ProLIGHT 1000, 2000 with ATC, and a 3000 with turret.
I'm looking for the PCI board for the 1000, but I may do the modifications to drive it, via another members work on 'reverse engineering' the cards functions / pinouts.
Has anyone converted a 2000 over to something with newer servo control, and perhaps the Ajax system? I'm going to test later today with a DOS-based computer running the PLM2000A software, which is supposed to support the ATC.
There's quite a few pro's and cons with each machine.
1000 - Stepper upgrades, drivers, Mach3
2000 - Servo / encoder upgrades, drivers, Mach3 (but don't know if the ATC can be supported).
Any help or insight would be appreciated.