LinkBack URL
About LinkBacks
Hello,
i have this picture from my maschine.
you can see the mounting of the motor and kupplung.
| | |
Hi all,
Does anyone have/know where I can get plans or good pics of the mounting of a NEMA 23 stepper to a mini mill? Thanks in advance!
Hello,
i have this picture from my maschine.
you can see the mounting of the motor and kupplung.
Not to hijack this thread but how about a drawing .I to am interested in plates thank you in advance.
Last edited by copper3416; 12-17-2005 at 12:35 AM.
How about Ron Steele's plan or wisp's plan
Thank you, but someone out there has to have a drawing for plates without having to puchase a full set of plans.Any takers out there?I see all of this spectacular enginuity on here and either everyone is purchasing plans or there is a couple of cookies on here who are helping each other.Lets see if we can get one to help us newbies.Thank you to the smart cookie or plain dude with a blueprint who ever comes first.Thank you in advance.Originally Posted by jdinh
Last edited by copper3416; 12-17-2005 at 12:41 AM.
It's kind of difficult to recommend a mount when some specs are missing. Do you plan direct drive or belt drive? Bracket-to-machine mounting holes existance? Length and diameter of drive screw protrusion? Mill size, motor size, etc??? Any photos of your machine?
I'm positive that quite a number of members here are willing to help but it's hard to without some specs to go by.
the other part thats almost impossible to know is the tolerance on any of the mounts. most of these machines are not made with good tolerances so even if someone had plans they probably wouldn't work on your machine.
his may help you design one that's appropriate for your machine. Something like a starting point. http://www.5bears.com/cnc06.htm
How do you deal with the bad tolerances on thease particular machines I have the hf 44991 and wanted to go direct drive. I havent picked motors yet as it seems tolerance is going to be an issue. I want to mill intricate jewelery wax patterns.What would be a good move.Thank you .
the mill is the hf 44991. I want to go with direct drive. There are no mounting holes that I know of.
Wilfreeman,
Look at this website. KDN sells complete kits and components for conversions.
AlanHTML Code:http://www.kdntool.com/_sgg/m1m2s1_1.htm
Thanks for all of the replys, guys! I've been away for awhile now - just got a brand spanking new youngin to take care of now - CNC is kind of on the back burner now. Anybody tried the CNC Fusion kits - it looks pretty good, and cheap too - even with the ballscrews! I've already got the motors/controller/PS - no software. I made an X axis mount, but couldn't figure out a good, compact, easy solution for the Y axis. I wasn't going to try to fab a Z axis - I was going to buy it anyway.
Posting Permissions
| | |
